A10 + PC/Mac Set Up

PC & Mac // System Configuration 


Standalone A10 Headset (PC/Mac)

[1]
Firmly plug the gray end of the A10 Volume Control cable into 3.5mm jack on the Headset.

[2]
Firmly plug the black end of the A10 Volume Control cable into PC/Mac headphone jack.

[3]  
Use the Volume Mixer on your PC or Mac for voice and game volume, and ensure your Default Device is set to ‘Speaker.’

[4]   
If your sound card has split pink and green jacks, you need to use a splitter (http://astro.gg/PCSPLIT).

[5]
In order to use a Y-splitter, firmly plug in the corresponding ends of the splitter cable into the respective Headphone and Microphone 3.5mm jacks on your PC.

[6]
Firmly plug the black end of the A10 Volume Control cable into the 3.5mm jack on the Y-splitter.

[7]
That’s it! Your A10 and PC/Mac are ready to game!

 

Comments, questions, unending praises...