Loading...
Guides

A10 Headset + PlayStation 5 Setup Guide

This guide will provide you with all the information you will need to set up your A10 Headset with your PlayStation 5.

Here is the ASTRO equipment you will need to connect:

  • A10 Headset
  • A10 Volume Control Cable

Step 1: Make sure your PlayStation 5 system is turned on.

Step 2: Connect the A10 Volume Cable with your A10 Headset firmly until you can no longer see the 3.5mm connector showing. The end closest to the volume wheel should be connected with your headset.

Step 3: Connect the other end of the cable with your PlayStation controller.

Step 4: Open the Settings menu on your PlayStation 5.

Step 5: Navigate to Sound menu option.

Step 5: Under Microphone, set the Input Device to Controller Headset.

Step 6:  Under Audio Output, check to make sure that the Output Device is also set to Controller Headset.

Step 7: While in this menu, ensure Output to Headphones is set to All Audio.

Step 8: Close out the menu and start up your favorite game.

Step 9: You’re good to go! Be sure to check in-game options regarding potential player muting or other audio setup, as these features can differ from game to game. Volume level can be adjusted using both the A10 Volume Control Cable and the PS menu, and Game:Voice balancing can also be controlled through the PS menu.

For any additional help, please reach out to our Customer Service team. Thanks for being a part of the ASTRO Family!