This guide will provide you with all the information you will need to set up your A10 Headset with your Xbox Series X or S.
Here is the ASTRO equipment you will need to connect:
- A10 Headset
- A10 Volume Control Cable
Video
Step by Step
Step 1: Make sure your Xbox Series X|S system is turned on.
Step 2: Connect the A10 Volume Cable with your A10 Headset firmly until you can no longer see the 3.5mm connector showing. The end closest to the volume wheel should be connected with your headset.
Step 3: Connect the other end of the cable with your Xbox controller.
Step 4: Open your Xbox menu by pressing the Xbox button on your controller, then head to the Settings menu.
Step 5: Navigate to the Volume & audio output settings menu.
Step 6: Under Volume options, set Party chat output to Headset.
Step 6: Under Headset audio, ensure that the Headset format is set to Windows Sonic.
If you have purchased a Dolby Atmos license, choose that instead and use the Dolby Access app to customize additional Equalizer and audio settings. Here’s more about Dolby Atmos and Xbox Series X|S audio.
Step 7: Close out the menu and start up your favorite game.
Step 8: You’re good to go! Be sure to check in-game options regarding potential player muting or other audio setup, as these features can differ from game to game. Volume level can be adjusted using both the A10 Volume Control Cable and the Xbox menu, and Game:Voice balancing can also be controlled through the Xbox menu.
For any additional help, please reach out to our Customer Service team. Thanks for being a part of the ASTRO Family!